TP-Link TL-SG105-M2

The TP-Link TL SG105-M2 is the best 5-Port Network Switch (Image from Tom’s Hardware)

TP-Link TL-SG105-M2

Best 5-Port Network Switch


  • Ports: 5Dimensions: 209x126x26 mm
  • Status Lights: 2 LEDs per port (Speed/Link/Activity)
  • Power Supply: External Cooling: Fanless
  • Warranty: Limited Lifetime


+ Relatively cheap

+ Good warranty

Extremely quick


-No loop detection

Power port isn’t on opposite side of the Ethernet ports.

After what appears to be an long time, networking devices are now getting ready to accept higher-speed internet connections.Buy refurbished cisco 2950 switch price online in India. From modems to routers, computers to NAS Big data pipelines are now beginning to become mainstream. 

It’s a great thing, especially since we use more data than we ever have before. It’s possible to even obtain a connection of 2 Gbps right now if you’re near one of the towns in which Google is currently offering the service.

However, of course you won’t have a connection of that speed to benefit from one of the newest 2.5 GbE network switches. 

File transfers as well as home media servers and high-bandwidth, high-capacity NAS setups are all able to benefit from a broadband switch. As they arrive, we’ll attempt to test the most recent and best to tell you how they perform. 

This brings us today to the TP-Link T-SG105-M2 which is a blazing fast, unmanaged 5-port 2.5 GbE switch, though larger than the typical 5-port gigabit switches, will be able to fit into any configuration – and budget, too.

Together with its 8-port counterpart the TL-SG108M2 model TL-SG105 is slim and easy to install, and has a fanless design and an enclosure made of metal that will ensure that it is at a minimum of noise and speedy. It’s also an 2.5 GbE switch, you may not require new cabling. 

As long as you’re already running Cat 5e cable within your network, you’ll be able to make use of this 802.3bz network protocol that guarantees 2.5 GbE or 5 GbE connections across 100 meters of cables. 

When we tested it, it blew out with lightning-fast data transfers that didn’t flicker when we loaded our network with the maximum amount of traffic we could manage. The switch was a bit warm , however, and topped out at around 120 degrees Celsius.

This switch is a replacement for our previous pick for our top switch with five ports, the QNAP QSW1105-5T, due to various reasons. The first is that the TP-Link is a much larger pipe for data and can reach an average of 2.34 Gbps where the QNAP which we tested just barely surpassed 2 Gbps in the real world.

Also, it comes with a more spacious design. Most importantly that, while the QNAP’s warranty is limited to two years, Check out Refurbished cisco2921 k9 switch online, the TP-Link’s TL-SG105-M2 is part of the company’s business class of switches, offering the user a long-lasting, limited warranty. 

Additionally, the TL SG105-M2 has QoS which is a characteristic of unmanaged switches, but is absent from this model. QSW 1105-5T.

If it was our job to choose two things that aren’t perfect about this switch that would be the absence of loop detection and the power supply is plugged to the opposite side of the ports. Of course, this is completely personal preference, however it can make installation a bit more difficult in certain setups. 

The TP-Link’s price list is $129.99 however, as of the moment of review, you can purchase it for $109 on Amazon that’s similar to the QNAP. It’s the TP-Link is the best choice in any case, and with the current prices it’s a no-brainer.

Best Small Power Over Ethernet (PoE) Network Switch

Ubiquiti Unifi USW-Flex is the best small PoE Ethernet (PoE) Network Switch (Image credit: Tom’s Hardware)

Ubiquiti Unifi USW-Flex

Best Small Power Over Ethernet (PoE) Network Switch


  •  Ports: 5 Dimensions 122.5×107.1×28 mm 
  • Status Lights 2 per Port PoE, Link/Speed/Activity 
  • Systems Status Power Supply: POECooling Fanless
  • Warranty: 2 Years (if purchased through Ubiquiti) or 1 year from an authorized reseller


+802.3af PoE power

+Small Size

+Weather Resistant

+Gigabit Speeds


-Can run hot

No actual SSH capability

Some features are not well-known.

The settings for -USW-Flex are not well-known within UniFi Controller software. UniFi Controller software

This is a difficult recommendation. Recent news about a recent data breach taking place at Ubiquiti regardless, we consider that the Ubiquiti USW-Flex is the most reliable network switch available to those who want to extend PoE to the forefront in their networks.

 The 5-port switch is affordable and can provide up to 15.4 Watts of power to the four ports that output power. Be aware of the word “up to” here; after you’ve got all ports full, the 46-watt power budget won’t allow 15.4 watts from going to each of the four ports at once. Therefore, if you’re taking up all the power for each port on the system, that fourth is given less importance and wattage is lower. 

The PeE features will only be available in the event that the UnifiUSW-Flex is powered via a reliable PoE injector. If you’re not sure which injector you should purchase, Ubiquiti sells a fairly cheap one.

Although it’s a managed switch, the Unifi USW-Flex lacks certain key features like Spanning Tree Protocol, which helps prevent switch loops, or the ability to use SSH for extensive command-line-management (although you can SSH in for some basic functionality like firmware updates), it works well as an edge-of-network device to power things like IP cameras or sensors that you may want to have minimal wiring going to.

In addition, the USW Flex is specifically designed for outdoor use. It offers a variety of options for mounting – whether magnetic or pole/wall mounts and also an hood that can be fixed over one of the Ethernet ports to prevent the ingress of moisture when it rains.

In addition, one of the features of the switch’s outdoor-friendly design is the recessive ports, which can be difficult to get from an RJ45 connector frombecause there’s not much space in which your hands can grip to release the clip of the connector.

We tested the Flex and found that, with the Flex without any configuration the device performed the same as other switches listed in this list. The transfer speeds were good and more efficient than other gigabit switch tested under stress. 

It’s important to note however that the Ubiquiti is quite hot, with temperatures that easily exceed 100°F when idle, and can get temperatures as high as 118.7 degrees F for every port being used — and this is in a cool area that has plenty of air circulation.

Leave a Reply

Your email address will not be published. Required fields are marked *